Engineer I/Engineer II/Sr Engineer/Sr Engineer II (Compression Services)

BHE GT&S JOB DESCRIPTION BHE GT&S has an exciting opportunity as an Engineer I, Engineer II, Sr Engineer or Sr Engineer II at our White Oaks General Office Building in Bridgeport, WV. RESPONSIBILITIES Responsible for optimizing the performance, reliability, efficiency, and environmental compliance of reciprocating engines and compressor systems. This role provides technical leadership for engine mapping, emissions compliance, clean-burn initiatives, equipment modernization, and compression optimization projects. The position partners closely with Operations, Gas Control, Automation & Controls, Engineering, and external vendors to develop and implement practical solutions that improve asset performance, reliability, and regulatory compliance. Key Responsibilities Perform engine mapping, tuning, and optimization activities, including Air/Fuel Ratio, PCC, Ignition Timing, and BSFC curve development. Evaluate engine and compressor performance using emissions analyzers, monitoring systems, and advanced diagnostics. Support emissions compliance, clean-burn projects, and emissions-reduction initiatives through startup, commissioning, troubleshooting, and technical expertise. Collaborate with Automation & Controls personnel to implement, validate, and optimize engine control logic, startup sequences, and operating parameters. Serve as a subject matter expert on reciprocating engine performance, combustion systems, fuel efficiency, and emissions-control technologies. Complete compression related calculations including, but not limited to, compressor capacity calculations, horsepower sizing, foundation/support design and piping design. Participate in design review meetings and complete drawing and design reviews for compression projects of all sizes. Provide engineering support for emissions-control systems, including SCRs, oxidation catalysts, and air-fuel ratio control systems. Lead engineering and capital projects from concept through commissioning, including budgeting, contractor coordination, procurement, outage planning, and project execution. Evaluate emerging technologies and recommend solutions to improve operational efficiency, reliability, and environmental performance. Support compressor optimization, vibration and pulsation analysis, equipment reliability improvements, and performance troubleshooting. Maintain a strong commitment to safety, environmental stewardship, regulatory compliance, and operational excellence. Preferred Expertise Reciprocating and centrifugal compressor systems Vibration and pulsation monitoring and analysis Compression optimization and reliability engineering Emissions-control technologies and regulatory compliance Engine performance tuning and fuel-efficiency optimization Proficient in CAD, CAESAR, eRCM, Ariel, CAT GERP and other industry-standard engineering applications Relocation assistance for this position is available dependent upon eligibility requirements. QUALIFICATIONS Engineer I : Four-year ABET accredited engineering degree Basic knowledge of engineering concepts, fundamentals and theory. Oral and written communication skills, including technical writing. Effective decision-making skills. Computer skills and application of software programs. Analytical and abstract thinking skills. Problem solving skills. Ability to learn to apply engineering theories and concepts to complex problems. Ability to interpret codes, regulations and practices. Ability to develop effective planning, project and organization skills. Ability to develop project management skills and to handle multiple tasks. Ability to work within a team environment. Engineer II : Four-year ABET accredited engineering degree 1-3 years of relevant engineering experience. Knowledge and application of engineering theories and principles, concepts, and fundamentals. Requires developmental experience in a professional engineering position. Competency in applying engineering principles, fundamental concepts, practices, and procedures requiring some evaluation, originality, and/or ingenuity to achieve project objectives. Understands and can apply knowledge of configuration management. Ability to perform engineering calculations using applicable software programs, Planning, organizational, and project management skills. Ability to develop and exercise leadership skills. Effective decision-making skills. Effective oral and written communication skills, including technical writing. Ability to think analytically and solve complex problems. Ability to interpret codes, regulations and practices. Equally effective working independently or in a team environment. Ability to process information quickly. Ability to manage multiple tasks effectively. Sr Engineer Four-year ABET accredited engineering degree. 5 years of relevant engineering experience. PE license preferred. Full knowledge of engineering theories and principles. Skilled in use of advanced techniques and modification and extension of theories, precepts, and practices of the field and related sciences and disciplines. Strong leadership skills, with proven ability to serve as team project lead. Provide guidance to less experienced engineers. Strong oral and written communication skills, including technical writing. Strong personal computer skills. Ability to think analytically and solve complex problems. Ability to interpret codes, regulations and practices. In-depth knowledge of various computer applications, with the ability to manipulate personal computer applications and perform engineering calculations using applicable software programs. Equally effective working independently or in team environment. Proven decision-making skills. Ability to process information quickly and manage multiple tasks effectively. Strong planning, organizational, and project management skills. Sr Engineer II: Four-year ABET accredited engineering degree . 8 years of relevant engineering experience. Requires PE, if no PE license, must have 10 years as a practicing engineer. Must have significant engineering knowledge of natural gas industry related to the design and installation of pipelines, compressor stations, and process equipment. Effective oral and written communication skills. Strong technical writing skills, including the ability to communicate a basic understanding of technical information to non-technical people. Effective analytical and problem-solving skills. Project management skills. Ability to prioritize and handle multiple tasks and projects concurrently. Critical thinking and decision-making skills. Education: Bachelor Preferred Degree: Engineering required. REQUIRED ENGINEERING CRITERIA : For placement of a candidate in the Engineer job series, the following criteria must be met : Possess a 4-year engineering degree from an ABET accredited engineering program based on the year that the engineering program was accredited by ABET, or Possess a 4-year engineering degree from an institution outside of the U.S. which is accredited through the country's own engineering accrediting body under the Washington Accord as a full signatory, and is a degree that was recognized by the country's accrediting body on or after the date that full signatory status was achieved, or Possess a 4-year engineering degree from a non-ABET accredited program and a post-graduate engineering degree from an institution where the undergraduate degree in the same engineering discipline is ABET accredited based on the year the engineering program was accredited by ABET, or Possess a 4-year degree in Physics, Chemistry, Math or Engineering Technology and a post-graduate engineering degree from an institution where the undergraduate degree in the same engineering discipline is ABET accredited based on the year the engineering program was accredited by ABET, or Holds or has previously held a valid U.S. Professional Engineer license. CHAMPION: Contribute to a team-centric work environment based on mutual respect and integrity Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. ABOUT THE TEAM BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin . click apply for full job details

PARTS COUNTER ASSOCIATE

Leo Auto Group is hiring a Parts Counter Associate to work the front line of our parts department. You'll help customers and technicians get the right parts, fast. Whether it's a walk-in customer doing their own brake job or a tech in the shop waiting on a part to finish a repair, you're the person who keeps things moving. This role is part customer service, part inventory management, and part detective work. You'll look up parts, verify fitment, place orders, manage stock, and handle returns. If you like solving puzzles and working with your hands as much as your head, this is a good fit. No automotive parts experience required. If you're sharp, reliable, and willing to learn the catalog systems, we'll get you there. What You'll Do - Help customers and service technicians identify and locate the correct parts - Look up parts using electronic catalogs and ordering systems - Process sales, returns, and warranty claims at the counter - Receive, verify, and stock incoming parts shipments - Maintain accurate inventory records and keep the department organized - Place special orders and follow up on backorders - Answer phones and respond to parts inquiries - Coordinate with suppliers on availability and pricing What We're Looking For - Strong customer service instincts - you're helpful without being asked - Comfortable using computers and learning new software - Detail-oriented - wrong part number means a wasted trip or a stalled repair - Able to lift up to 50 lbs and stay on your feet through the shift - Good communicator who can work with techs, customers, and vendors - High school diploma or equivalent Nice to Have (Not Required) - Previous parts counter, auto parts retail, or inventory experience - Familiarity with OEM or aftermarket parts catalogs - Basic mechanical knowledge or terminology What We Offer - Health, dental, and vision insurance - 401(k) - Paid time off - Employee vehicle purchase program - Parts department career path - counter to management Compensation details: 0 Yearly Salary PIf9ef5-

Equipment Operator

Job Summary: The Equipment Operator is responsible for safely and efficiently operating and maintaining heavy equipment to support aggregate production operations. This position operates large loaders, excavators, rock trucks, and hydraulic hammers to safely extract, move, process, and stockpile rock and other aggregate materials. The Equipment Operator plays a critical role in achieving production goals, maintaining product quality, and supporting a safe work environment. This role performs routine equipment inspections, assists with maintenance activities, and works collaboratively with plant personnel to promote continuous, efficient operations. Essential Functions: 1. Protect family and friends. Safely operate large loaders, excavators, rock trucks, hydraulic hammers, and related equipment to extract, move, process, and stockpile aggregate materials while maintaining efficient material flow throughout the quarry and plant. 2. Results matter. Achieve daily production and quality objectives by loading haul trucks, feeding crushing and screening operations, maintaining stockpiles and quarry-floor conditions, and following established production plans and leadership direction. 3. Safety always wins. Protect employees, equipment, and the worksite by following company safety policies, site traffic plans, workplace examination requirements, and applicable MSHA regulations; identify, communicate, and address hazards within the scope of the role. 4. Dedication. Maintain equipment readiness and minimize downtime by completing required pre- and post-shift inspections, reporting equipment defects or abnormal operating conditions, and performing basic cleaning, lubrication, servicing, and maintenance support activities. 5. Loyalty. Maintain accurate equipment inspection, production, and safety documentation, and participate in required safety meetings, MSHA training, and other job-related training. 6. Respect and engage. Promote safe, coordinated, and continuous quarry operations by communicating effectively with supervisors, plant operators, mechanics, truck drivers, and team members. Requirements, Education and Experience: High school diploma or GED preferred. Three years of experience safely operating heavy equipment in a quarry, mining, construction, asphalt plant, or similar industrial environment preferred. Experience operating operates large loaders, excavators, rock trucks, and hydraulic hammers, or similar mobile equipment required Ability to inspect equipment, identify operational or mechanical issues, and communicate maintenance needs effectively. Basic mechanical aptitude with the ability to assist with routine maintenance, preferred. Effective communication and teamwork skills with the ability to work independently and collaboratively. Valid driver's license and reliable transportation required. Authorized to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The actual rate or salary offered will be determined based on job-related factors, including relevant experience, education, qualifications, skills, and other legitimate business considerations, consistent with applicable law and the Company's compensation practices. Travel: Position requires some travel to local plants in the region based on the needs of the business. Work Environment/Physical Demands: This position works indoors and outdoors at times in inclement weather. Heavy work that includes moving objects up to 100 lb. or more. This position works on or near moving mechanical parts and loud equipment. Requires the ability to sit or stand for long periods of time as well as lifting, bending, kneeling, squatting, climbing, walking, reaching, driving, and repetitive motion. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. PMC PI49026d73addc-5084

PART TIME TELLER

KEY QUALIFICATIONS: Passionate in helping others, Enthusiastic Team Player, Possess Problem Solving and Critical Thinking Skills and have a comprehensive understanding of First Community Credit Union Products and Services. Primary Responsibilities: Model a high energetic, world-class service and sales culture that continually strives to improve the way we serve our members. Perform accurate financial transactions for members. Offer credit union products and services that fit individual member needs. Provide administrative support as needed under the supervision of the Head Teller or a member of the management team. Uphold a strong sales culture within the credit union. ESSENTIAL DUTIES AND RESPONSIBILITIES Greet members warmly, answer questions regarding their accounts, and assist with special requests such as Account History review and Mobile Banking. Process daily routine transactions securely including: cashing checks, processing deposits & withdrawals, completing transfers, and making loan payments. Count currency, balance a cash drawer throughout the day and at the end of each shift. Process Coin Transactions accurately at any branch that possess a coin machine/counter. Investigate/resolve any cash variances in a timely manner partnering with the Teller Supervisor or Branch Manager. Process and/or collect fees associated with Over Draft Privilege for members accounts. Complete required compliance documentation when needed. Assist with answering phones and routing calls to the appropriate staff member when needed. Making outbound calls to other departments or members. Have a firm understanding of FCCU's Check hold Policy and Procedures. Assist with sending out mailings when needed. Maintain a clean and neat work area. Maintain positive working relationships with members, and all credit union staff. Distribute credit union promotional items such as flyers or buck slips to assist in promoting credit union special events or campaigns. Attend credit union functions as requested. Follow all State and Federal Laws and Regulations. Make suggestions for improving current processes, products or services. Perform other duties as assigned. Required Knowledge, Skills, and Abilities: Passion and Dedication to helping people. Energetic personality and Highly Engaged individual. Cash Counting/Handling Experience. Typing and computer skills. Accountability and Accuracy while providing timely professional service. Works well with others and follows directions. Good verbal and written communication skills. Willingness to learn new skill sets to advance your career with First Community Credit Union. Ability to work Monday-Friday, Weekends and extended hours as needed. Education and Experience: High School Diploma/G.E.D. or be under a work study program. Previous Cash Handling experience beneficial. Employees must comply with government and other regulations affecting the credit union industry including but not limited to the Bank Secrecy Act and The USA Patriot Act. Working Conditions: Normal office working conditions with the absence of disagreeable elements. Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Compensation details: 17-17 Hourly Wage PI83a971d45a6a-7755

General Manager

Position Title : General Manager - Midwest Department: Operations Reports To: Chief Operations Officer FLSA Status: Exempt Compensation: $145,000 - $165,00 Annually Position Summary: The General Manager - Midwest provides leadership and operational oversight for Bailey's Midwest/Eastern operations, including Illinois, Minnesota, and Georgia. This role leads day-to-day operations through the Production Leadership Team to align operational priorities, staffing needs, production plans, quality standards, and business goals. The General Manager works closely with the COO and key business partners to support operational excellence, financial accountability, safety, compliance, continuous improvement, and consistent execution across assigned locations. This role is responsible for building accountability, developing leaders, supporting a positive workplace culture, and ensuring the effective use of people, land, equipment, plants, and other nursery resources to produce high-quality nursery stock profitably and sustainably. Essential Duties and Responsibilities: Operational Leadership Provide leadership and operational oversight for the company's Midwest/Eastern operations. Lead the Production Leadership Team across assigned locations to align operational priorities, staffing needs, production plans, quality standards, and business goals. Maintain a hands-on leadership approach and strong communication across assigned facilities to understand operations, connect teams, and support consistent execution of company goals. People Leadership and Culture Lead through managers by setting clear expectations, building accountability, developing leadership capability, supporting succession planning, and aligning teams across locations. Promote a positive workplace culture that supports safety, accountability, excellence, growth, and the company's Core Values. Production, Assets, and Continuous Improvement Ensure the effective use of nursery assets, including people, land, equipment, and plants, from planning and propagation through planting, harvest, storage, and shipping. Support the consistent production of high-quality nursery stock in a profitable and sustainable manner. Promote efficiency and continuous improvement through improved processes, yields, automation, technology, continuing education, and Lean manufacturing principles. Financial and Business Accountability Provide leadership for operational financial accountability, including budget planning, labor cost management, productivity, capital planning input, operational forecasting, and profitability goals. Monitor expenses, payables, financial reports, operational metrics, and other business information to support effective decision-making. Documentation, Compliance, and Risk Management Establish and maintain consistent, centralized documentation, including Standard Operating Procedures, property information, regulatory or legal information, and other key operational records. Partner with HR, Safety, Compliance, and operational leaders to support regulatory compliance, employee relations consistency, safety expectations, seasonal workforce needs, and operational risk management. Cross-Functional and Strategic Partnership Partner cross-functionally with key internal stakeholders to align labor, production, inventory, customer demand, safety, financial goals, and overall business priorities. Collaborate with the West Coast General Manager and leadership team members to develop, understand, communicate, and execute long-term operational strategy. Stay engaged with the greater industry, customers, vendors, neighbors, and appropriate organizations to learn, progress, and promote the nursery. Required Qualifications: Minimum of 8 years of relevant industry experience, including at least 5 years in a leadership role with responsibility for people leadership, operational execution, and business performance. Extensive knowledge of nursery production, combined with strong business acumen and the ability to lead complex operational functions. Demonstrated leadership skills, including resilience, adaptability, accountability, and the ability to lead large teams through pressure, change, and operational demands. Strong verbal and written communication skills, with the ability to effectively communicate, prepare, and present business information to employees, leaders, and key stakeholders throughout the organization. Demonstrated ability to manage personnel matters professionally and consistently, including hiring, coaching, performance management, and corrective action. Ability to travel as needed to Bailey operations, industry events, and customer locations. Proficiency with technology tools used to support business operations, including Microsoft Office, reporting systems, ERP platforms, inventory software, and other internal systems. Valid driver's license and ability to meet company criteria for insurability. Preferred Qualifications : Bachelor's degree in horticulture, agriculture or business field preferred, or equivalent experience. Physical Requirements and Work Environment: This role works in both office and nursery/field environments and requires travel to company locations, industry events, and customer locations as needed. The employee must be able to sit, stand, walk, communicate, use a computer, review documents, attend meetings, and move throughout office, nursery, greenhouse, field, production, storage, and shipping areas. The role may include exposure to outdoor weather conditions, uneven surfaces, equipment traffic, dust, dirt, noise, and other conditions common in nursery and agricultural operations. Disclaimer: This job description is intended to describe the general nature and level of work being performed by individuals assigned to this position. It is not intended to be an exhaustive list of all responsibilities, duties, and skills required. Duties, responsibilities, and activities may change at any time with or without notice. This description does not constitute a contract of employment, and the company reserves the right to revise or change job functions as needed to meet business needs. Offers of employment are contingent upon the successful completion of a background check. Bailey Nurseries is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender identity, or any other legally protected status. All qualified applicants will receive consideration for employment. Employment with Bailey Nurseries is at-wil l and may be terminated at any time by either party, in accordance with applicable law. If you need assistance or reasonable accommodation during the application process, please contact our HR team. Compensation details: 00 Yearly Salary PI823b9cdcb5-

Controller

About Zentech Manufacturing Zentech is one of the leading and most highly certified U.S.-based Electronics Manufacturing Services (EMS) providers in North America. We support original equipment manufacturers (OEMs) of medical devices, aerospace and defense products, and industrial equipment with engineering and manufacturing solutions spanning product design, printed circuit board layout, test development, and manufacturing support through the entire product lifecycle. Our work is unseen but vital, including support for domestic and foreign military customers who rely on our technical expertise to keep warfighters safe and the nation's networks secure. Zentech has built deep strengths in manufacturing high-reliability, high-complexity, low-to-medium-volume printed circuit boards and box builds, with best-in-class scalability to higher-volume production. Proudly Made in America, our team works together every day in support of the country's lives and liberties. The Role The Controller manages the site's financial activities, including accounting, budgeting, financial reporting, and compliance. This role calls for a strategic thinker with strong analytical skills and the ability to effectively lead and influence a team. Reporting to the CFO, the Controller ensures financial reporting meets required standards in accordance with generally accepted accounting principles (GAAP). What You'll Do Prepare and publish timely monthly reporting and forecasted financial statements Support month-end and year-end close processes Ensure quality control over financial transactions and financial reporting Manage compliance with local, state, and federal government reporting requirements and tax filings Develop and document business processes and accounting policies to maintain strong internal controls Provide management with analytical support in financial aspects of business planning, including headcount projections and capital equipment planning Interpret the division's financial planning, forecasting, and measurement requirements Review sales, cost, income, bookings, backlog, headcount, material, and other related data Analyze operational metrics - including MRB, labor utilization, excess and obsolete inventory, and material variances - to identify opportunities to enhance financial performance Monitor key performance indicators (KPIs) and translate data into actionable insights Partner with management to establish budget and cash flow forecasts Lead by example, fostering a culture of accountability and continuous improvement What We're Looking For Bachelor's degree in Accounting, Finance, or a related field CPA or CMA preferred, though not required 5 years of relevant experience; manufacturing experience preferred Thorough knowledge of accounting principles and procedures Experience preparing financial statements Experience with general ledger functions and the month-end/year-end close process Proficiency with accounting software, including system administration Strong leadership and team management skills Excellent analytical and problem-solving skills High attention to detail and accuracy Zentech Manufacturing is an Equal Opportunity Employer. Zentech will recruit, hire, train, and promote persons in all job titles without regard to real or perceived classification of race, ethnicity, ancestry, color, marital status, religion, national origin, veteran status, sex, sexual orientation, genetic information, gender identity or expression, age, or physical or mental disability. The employee selected for this role will be expected to work the hours required to fulfill the duties of the position, which may exceed 40 hours per week and include evenings or weekends as necessary. Compensation details: 00 Yearly Salary PI3e38b78cc3f8-8094

Shop Employee

Precast Terrazzo Enterprises is a 100% employee-owned company specializing in premier custom precast terrazzo. Because we craft each design individually, the Shop Employee role is critical to our success. We are looking for full-time shop employees who like being part of a team, take pride in their work quality, and enjoy the challenge of learning something new. We are looking to add a Full-Time, permanent shop employee for a Monday through Friday day shift 6 am to 3:30 pm. Overtime is available for those who are interested. This role is an opportunity to learn a specialized trade within the Terrazzo and flooring industry. Job Responsibilities: Being able to follow instructions for the various designs Building and creating molds Mixing the custom blends and pouring into the molds Sanding, cutting, and polishing the precast products Confirming quality control and design specifications Shipping and receiving materials and raw materials Filling customer orders What You Need to Get the Job Done: Team-oriented player attitude History of reliability Committed to high safety standards Ability to measure and understand basic calculations Ability to lift heavy items Ability to tell the difference between various colors Warehouse experience preferred Forklift experience is a plus but is not required What You'll Love About Us: Great Company Culture: Ownership culture means being invested in each other's success. Our guiding principles are: Passionate, Accountability, Trust, Collaboration, Innovation, and Resilience. Rest and Relaxation: Three weeks of Paid Time Off for a beginning year, growing to five weeks with longevity. Health Benefits: Medical with HSA (with company match) and FSA options, dental, vision, and an employee assistance program. Prepare for the Future: 401(k) with company match, ESOP contributions, and employee financial education. Compensation details: 17-19 Hourly Wage PI2f9ec3e5-

Welder

You will perform welding sequences in the manufacturing of parts, plan and prepare work of joints and welding, and apply different types of welding processes. You will work in collaboration with the technical team and supervisors to build a product that matches our high-quality standards. This position is open on a night shift. Base pay starts at $25.25 plus additional $2/hour shift premium for night shift. Base pay increases with verified welding experience. As a Welder Assembler- Wind Tower Fabrication, you must be able to: Read and analyze blueprint and production documents Prepare work of joints and welding; select the right equipment, prepare the joints, perform the tracing and take measurements Perform welding and assembly sequences in accordance with the welding processes (SAW, SMAW, GMAW, FCAW, Plasma Arc Gouging and Air Carbon Arc Gouging) Respect the welding dimensions and requirements in accordance with the established specifications Complete the proper production and quality documents Inspect parts in collaboration with the quality department Perform other duties as assigned. VALUED S KILLS: Manual dexterity Precision and detail oriented Sense of observation Efficiency Team spirit REQUIREMENTS : Must have the ability to wear a tight-fitting respirator Must have the ability to acquire welding certifications Must be able to: Climb stairs and ladders; work at heights Lift and carry between 30-50 lbs. Stand and walk for long periods of time Bend, kneel, squat, twist, reach Work above shoulders Tolerate exposure to weather, hot/cold environments ASSETS: Diploma/ training in Welding or relevant training (or equivalence); Relevant experience This position opening is on the nights shift. This position opening is on the nights shift. PI9ce7436b8f10-0540

Quality Control Technician

Job Summary: The Quality Control Technician plays a critical role in supporting continuous production and ensuring compliance with State, Federal, and local specifications in our Hot Mix Asphalt (HMA), crushed stone, sand and gravel operations. This position requires a mechanically inclined, hands-on individual who is experienced and comfortable working in manual labor environments using tools, equipment, and machinery. Essential Functions: Protect Family and Friends . Follow all Company Safety Policies and Procedures as well as Occupational Safety and Health Administration (OSHA) regulations and guidelines. Support business activities, objectives, and programs. Mastery. Reliably perform all required HMA materials testing in accordance with the procedures outlined in Peckham Industries' Quality Control Program, with a focus on producing the highest quality product in the most cost-effective manner. Conduct asphalt mix testing such as gradation, asphalt content, volumetrics, and temperature checks, and accurately input results into the QC software program. Ownership and caring. Maintain a strong understanding of asphalt plant production equipment and facility operations to identify, diagnose, and assist in correcting production deficiencies. Collaborate with plant management and equipment operators, maintaining awareness of production and maintenance schedules. Observe and participate in on-site HMA testing, including mat density, temperature, and compaction monitoring. Communicate test results and any quality-related concerns promptly and consistently to plant management to support informed decision-making and continuous quality improvement. Act as a liaison between paving crews, contractors, and dispatch, ensuring smooth communication regarding mix quality and production timelines. Results matter. Document all quality control testing clearly, accurately, and in a timely manner. Maintain a database of daily test results and ensure the testing environment is clean and safe. Ensure that laboratory equipment is properly maintained and in good working order. Respect and engage. Serve as a resource to the sales team, customers, paving crews, and plant management by offering technical support and assistance related to HMA quality and performance. Recommend and assist with adjustments to mix designs or production processes to ensure compliance with job specifications. Dedication. Collect and prepare HMA samples at the plant and job sites in accordance with specification requirements, including loose mix and compacted specimens for quality verification and acceptance testing. Committed to serve. Perform testing of fine and coarse aggregate gradations, asphalt binder properties, and reclaimed asphalt pavement (RAP) materials, increasing testing frequency when materials fall outside of specifications. Maintain inventory of mix additives, fibers, and other specialty materials used in asphalt production. Requirements, Education and Experience: Degree in construction, engineering, or related fields is preferred but not required. Experience in mining, road construction or a relatable field is encouraged. 3-5 Years of relatable knowledge preferable. Must have the flexibility to work irregular hours, including days, evenings, overnights, and occasional weekends, based on customer schedules and business needs, particularly during paving operations. Must currently hold or be willing to obtain applicable asphalt-related certifications (e.g., NETTCP, ACI Asphalt, or State DOT certifications, as applicable). Have experience working hands-on in manual labor environments Be comfortable using mechanical tools, equipment, and machinery Must maintain a valid driver's license and have reliable transportation. Proficient literacy in English and computational Math; clear verbal and written communication is required for this position Must be computer literate and comfortable using Word, Excel, and email communications Must have legal right to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The actual rate or salary offered will be determined based on job-related factors, including relevant experience, education, qualifications, skills, and other legitimate business considerations, consistent with applicable law and the Company's compensation practices. Travel: Some travel throughout the serviced region is required, using a personal vehicle to access various plant and job site locations. Work Environment/Physical Demands: Medium Work; Exerting up to 50lbs of force occasionally, and/or up to 20lbs of force frequently, and/or up to 10lbs of force constantly to move objects. This position works on or near moving mechanical parts and loud equipment. Requires the ability to sit or stand for long periods of time as well as lifting, bending, kneeling, squatting, climbing, walking, reaching, driving, and repetitive motion. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe we will pave the way for future success. PPC Compensation details: 24-26 Hourly Wage PI59dc250e07bd-5414

Forklift Operator III

Xpedient is a full-service 3rd party logistics provider. We have experience helping a diverse client base in warehousing services, transportation management, supply chain management, order fulfillment and labor needs. $22 per hour 6:30pm-3am Summary Our Team Members operate powered industrial equipment such as stand-up and sit-down forklifts with fork or clamp attachments. Tasks loading/unloading pallets and cases, picking/staging orders, putting away pallets, and other general forklift work. Roles and Responsibilities Conduct operations in a manner promoting safety Sit-down lift experiences preferred Minimum of 6 months of forklift and warehouse experience Must be super-efficient in all tasks required Put away inbound shipments/move product to storage locations using a forklift Picking cases by the each onto pallets using the powered equipment Prepare product for shipment ensuring the exact number and correct item is staged for loading Keep appropriate records and reports for inventory accuracy Report quality variances Maintain the facility's equipment and materials in a neat, clean, and orderly fashion Assist in any required physical inventories Complete daily inspection of equipment Perform additional duties as assigned by management Ensure proper stock rotation Satisfactory completion of a forklift training program Comply with all OSHA and MSDS standards Ability to read, understand and follow instructions, and to code applicable documents Qualifications Must be able to pass Forklift Driving Skills test This position requires lifting cases weighing from 20-45 pounds repeatedly throughout a long work period 18 years or older Working in a high-speed manufacturing environment (e.g., team-oriented, deadline driven, high performance demands, fast-paced, etc.) Driving a forklift (e.g., performing basic operations such as driving forwards, driving backwards, lifting and lowering boom, maneuvering in tight areas without damaging product, etc.) Working with racking systems and loading/unloading pallets (e.g., pulling and placing pallets on/off vertical product racking systems and trucks, maximizing storage by stacking products vertically, etc.) Working with standards of operation (e.g., OSHA requirements on minimum/maximum speeds, signaling, putting products in appropriate areas, etc.) Safety: Observe and follow health and safety regulations Enforces operating instructions and safety policies. Assist management in establishing warehouse standards and procedures Maintain detailed records of safety incidents Assign designated safety personnel Maintain warehouse in a clean, safe, and orderly condition. Xpedient Logistics is an Equal Opportunity Employer. Xpedient offers competitive wages, insurance benefits (medical, dental, vision and life), paid time off and holidays. Compensation details: 22 Hourly Wage PIee2-8438

Prevailing Wage Administrator

Exxel Pacific is seeking individuals who above all else desire joining, and being a key member of, an industry leading and dynamic company that is genuinely focused on its family of employees who, through working collaboratively together, create a thriving TEAM oriented culture. Job description As a member of the Exxel Pacific TEAM, The Prevailing Wage Administrator is responsible for ensuring the company's compliance with all federal, state, and local prevailing wage laws and labor compliance requirements. This role administers certified payroll reporting, monitors prevailing wage requirements across multiple projects, coordinates with project teams, subcontractors, payroll, and accounting, and serves as the company's subject matter expert on prevailing wage compliance. Essential Functions Administer prevailing wage compliance for all public works and prevailing wage projects. Review contract documents to identify prevailing wage, certified payroll, and labor compliance requirements. Establish labor compliance procedures for new projects and communicate project-specific requirements to internal teams. Determine and monitor applicable wage determinations, employee classifications, fringe benefit requirements, and regulatory updates throughout each project. Prepare, review, and submit certified payroll reports accurately and on schedule. Verify payroll records both internally and with our subcontractors accurately reflect employee classifications, wages, fringe benefits, overtime, apprenticeships, and authorized deductions. Coordinate with Payroll to ensure employees are compensated in accordance with prevailing wage requirements and resolve payroll discrepancies as needed. Collect, review, and monitor subcontractor certified payroll reports and labor compliance documentation for completeness and accuracy. Follow up with subcontractors to resolve deficiencies and ensure timely compliance with contractual and regulatory requirements. Prepare, submit, and maintain Statements of Intent, Affidavits of Wages Paid, and other required labor compliance documents. Maintain organized project files and records to support audits, agency reviews, and document retention requirements. Respond to requests from owners, awarding agencies, auditors, and regulatory agencies regarding labor compliance matters. Monitor reporting deadlines and ensure timely submission of all prevailing wage and labor compliance documentation. Stay informed of changes to federal, state, and local prevailing wage laws, labor regulations, and reporting requirements. Develop, recommend, and implement processes that improve labor compliance efficiency and reduce organizational risk. Serve as the company's subject matter expert on prevailing wage laws, certified payroll, and labor compliance requirements. Provide guidance and training to Project Managers, Superintendents, payroll, accounting, human resources, and subcontractors regarding prevailing wage compliance. Collaborate with project teams, accounting, payroll, and operations to proactively identify and resolve labor compliance issues and correct them effectively. Perform other duties and special projects as assigned in support of the company's operations. Associate's degree in Business Administration, Accounting, Human Resources, Construction Management, or a related field preferred; equivalent combination of education and relevant experience will be considered. Three (3) to five (5) years minimum experience administering prevailing wage compliance, certified payroll, or labor compliance within the construction industry. Working knowledge of federal, state, and local prevailing wage laws, including certified payroll reporting, wage determinations, labor classifications, fringe benefits, apprenticeship requirements, and public works regulations. Familiarity with Washington State and Oregon prevailing wage requirements and the Davis-Bacon Act. Proficiency with labor compliance software (e.g., L&I portal, LCPtracker, etc.). Ability to manage multiple priorities, meet deadlines, and maintain confidential information in a fast-paced environment. Excellent written and verbal communication skills with the ability to effectively collaborate with project teams, subcontractors, payroll, accounting, human resources, regulatory agencies, and other stakeholders. The pay range for this position is $27.00-$43.00 per hour. Exxel Pacific offers a comprehensive and competitive benefits package including medical, dental, vision, life, and disability insurance. Additional benefits include a 401k match, Short-Term Incentive Plan, Employee Stock Ownership Plan, Employee Assistance Program, and paid time off. Paid time off includes 8 paid holidays and 10-25 vacation days per year depending on years of service with Exxel. PI5326cfd5c5-